kmeter1 MPC8360
kmsupx5 MPC8321
mgcoge MPC8247
- mgcoge2ne MPC8247
+ mgcoge3ne MPC8247
mgcoge2un ARM926EJS (Kirkwood SoC)
mucmc52 MPC5200
muas3001 MPC8270
*/
#include <common.h>
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM82XX)
#include <mpc8260.h>
#endif
#include <ioports.h>
#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */
#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000))
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM_82XX)
#define SDA_MASK 0x00010000
#define SCL_MASK 0x00020000
-static void set_pin(int state, unsigned long mask)
+void set_pin(int state, unsigned long mask)
{
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
int ethernet_present(void);
int ivm_read_eeprom(void);
+void set_pin(int state, unsigned long mask);
int set_km_env(void);
int fdt_set_node_and_value(void *blob,
#if defined(CONFIG_MGCOGE)
puts("Board: Keymile mgcoge");
#else
- puts("Board: Keymile mgcoge2ne");
+ puts("Board: Keymile mgcoge3ne");
#endif
if (ethernet_present())
puts(" with PIGGY.");
return 0;
}
+#ifdef CONFIG_MGCOGE3NE
+/*
+ * For mgcoge3ne boards, the mgcoge3un control is controlled from
+ * a GPIO line on the PPC CPU. If bobcatreset is set the line
+ * will toggle once what forces the mgocge3un part to restart
+ * immediately.
+ */
+void handle_mgcoge3un_reset(void)
+{
+ char *bobcatreset = getenv("bobcatreset");
+ if (bobcatreset) {
+ if (strcmp(bobcatreset, "true") == 0) {
+ puts("Forcing bobcat reset\n");
+ set_pin(0, 0x00000004); /* clear PD29 to reset arm */
+ udelay(1000);
+ set_pin(1, 0x00000004);
+ } else
+ set_pin(1, 0x00000004); /* set PD29 to not reset arm */
+ }
+}
+#endif
+
/*
* Early board initalization.
*/
out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
H_OPORTS_FCC1_PW_DWN));
+#ifdef CONFIG_MGCOGE3NE
+ handle_mgcoge3un_reset();
+#endif
return 0;
}
PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
mgcoge powerpc mpc8260 km82xx keymile
-mgcoge2ne powerpc mpc8260 km82xx keymile
+mgcoge3ne powerpc mpc8260 km82xx keymile
SCM powerpc mpc8260 - siemens
TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
ORxG_SCY_5_CLK |\
ORxG_TRLX)
-
-/*
- * Bank 1 - 60x bus SDRAM
- */
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
-
#define CONFIG_SYS_MPTPR 0x1800
/*
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
-/*
- * SDRAM initialization values
- */
-
-#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_8 |\
- ORxS_ROWST_PBI0_A7 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A14_A16 |\
- PSDMR_SDA10_PBI0_A9 |\
- PSDMR_RFRC_5_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_1C |\
- PSDMR_CL_2)
-
/*
* UPIO FPGA (GPIO/PIGGY) on CS3 initialization values
*/
#define CONFIG_MPC8247
#define CONFIG_MGCOGE
#define CONFIG_HOSTNAME mgcoge
+#define CONFIG_KM_82XX
#define CONFIG_SYS_TEXT_BASE 0xFE000000
CONFIG_SYS_FLASH_BASE_2 }
#define MTDIDS_DEFAULT "nor3=app"
+/*
+ * Bank 1 - 60x bus SDRAM
+ */
+#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
+
+/* SDRAM initialization values
+*/
+
+#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+ ORxS_SDAM_MSK) |\
+ ORxS_BPD_8 |\
+ ORxS_ROWST_PBI0_A7 |\
+ ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
+ PSDMR_BSMA_A14_A16 |\
+ PSDMR_SDA10_PBI0_A9 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_1C |\
+ PSDMR_CL_2)
+
+
/* include further common stuff for all keymile 82xx boards */
#include "km82xx-common.h"
+++ /dev/null
-/*
- * (C) Copyright 2007-2010
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MGCOGE2NE
-#define __MGCOGE2NE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8247
-#define CONFIG_MGCOGE
-#define CONFIG_HOSTNAME mgcoge2ne
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-#include "km-powerpc.h"
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_SIZE 32
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /*
- * max num of sects on one
- * chip
- */
-
-#define CONFIG_SYS_FLASH_BASE_1 0x50000000
-#define CONFIG_SYS_FLASH_SIZE_1 64
-#define CONFIG_SYS_FLASH_SIZE_2 0
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_FLASH_BASE_1 }
-
-#define MTDIDS_DEFAULT "nor2=app"
-
-/* include further common stuff for all keymile 82xx boards */
-#include "km82xx-common.h"
-
-#endif /* __MGCOGE2NE */
--- /dev/null
+/*
+ * (C) Copyright 2011
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MGCOGE3NE
+#define __MGCOGE3NE
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8247
+#define CONFIG_MGCOGE3NE
+#define CONFIG_HOSTNAME mgcoge3ne
+#define CONFIG_KM_82XX
+
+#define CONFIG_SYS_TEXT_BASE 0xFE000000
+
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+#include "km-powerpc.h"
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xFE000000
+#define CONFIG_SYS_FLASH_SIZE 32
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /*
+ * max num of sects on one
+ * chip
+ */
+
+#define CONFIG_SYS_FLASH_BASE_1 0x50000000
+#define CONFIG_SYS_FLASH_SIZE_1 128
+
+#define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
+ CONFIG_SYS_FLASH_BASE_1 }
+
+#define MTDIDS_DEFAULT "nor2=app"
+
+/*
+ * Bank 1 - 60x bus SDRAM
+ * mgcoge3ne has 256M.
+ */
+#define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */
+
+#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+ ORxS_SDAM_MSK) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI1_A4 |\
+ ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR (PSDMR_PBI |\
+ PSDMR_SDAM_A17_IS_A5 |\
+ PSDMR_BSMA_A13_A15 |\
+ PSDMR_SDA10_PBI1_A6 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_2C |\
+ PSDMR_CL_2)
+
+/* include further common stuff for all keymile 82xx boards */
+#include "km82xx-common.h"
+
+#endif /* __MGCOGE3NE */
projects / project / bcm63xx / u-boot.git / commitdiff